uniform strength

The matrix of Chinese Medicine Patcher was studied by uniform design and taking adhesion strength as index.

采用均匀设计法，以粘着强度为指标，筛选中药巴布剂基质。

Empirical Formula for the Particle of the Maximum Electric Field Strength in a Non-uniform Field

颗粒物在非均匀电场中最大场强的经验公式

In this thesis, the calculation method of the elastic force and strength of varied section open-ring has been proVided, If this kind seating ring of supporting ring is used in cylinder case, the uniform elastie force ex-erted on cylinder wall by the ring is produced.

本文主要论证了变截面开口圆环的弹力集度及强度校核计算方法，缸套内采用这种密封环或支承环，可使圆环对缸壁沿圆周产生均匀的弹力。

The uniform axis compression capability of spherical pore Al alloy foam was studied and the relationship between compression strength and relative density was acquired.

研究了球形孔泡沫铝合金的单轴压缩性能，得到了抗压强度与相对密度的关系；

The pitting corrosion damage of pipeline was considered as uniform hole-type damage based on the damage theory. The degradation regularity of apparent yield strength and elastic modulus of damaged pipeline steel was investigated by tension test of specimen with artificial holes.

基于损伤理论，将管壁点腐蚀损伤层材料视作孔洞型均匀损伤材料，通过模拟多孔材料拉伸实验，研究了孔洞型损伤管线钢表观弹性模量和屈服强度退化规律。

In-plane inelastic stability and ultimate strength of uniform I-section three-hinged circular steel arch in uniform compression

简支楔形变截面工字钢梁的弹性弯扭屈曲均匀受压工字型等截面三铰圆弧钢拱的平面内稳定性和极限强度

Design a Beam of Uniform Strength to measure the tiny displacement and weight.

设计了等强度梁传感平台，进行了光纤光栅测量微位移和质量的实验。

The Effect of Prefabricated-Hole Parameters on Casing Collapse Strength under Non-Uniform Loads

非均匀载荷下预制孔参数对抗挤强度的影响

The inspection results indicated that the uniform diameter of pure sand-gravel columns in mud and silt reached 55~ 82 cm, and the boring core sample strength of grouting column reached 4.3~ 11.4 MPa at the age of 28 d.

检测结果表明，挤入淤泥和粉土中的纯砂砾柱平均直径达到55~82cm，28d龄期时水泥砂砾灌浆体取芯的抗压强度达到4.3~11.4MPa。

Currently most of the liver tissue engineering using composite materials as scaffolds, and generally get a uniform cross-linking strength by chemical crosslinking methods, but the choice of crosslinking agent is critical.

目前肝组织工程大多采用复合材料作为支架材料，通过化学交联的方法一般能获得理想的、均匀一致的交联强度，但交联剂的选择非常关键。